How to Clean Gas Stove Pipe and Burner Holes?

How to Clean Gas Stove Pipe and Burner Holes

Keeping the kitchen clean is an utmost necessity. And that includes everything in the kitchen: the cooktop, gas stove pipe, burners, kitchen counter, chimney, and everything that is in your kitchen. We must know why and how to clean the gas stove pipe regularly to ensure that there is no leakage from the tube.

Furthermore, an unclean stove burner is unsanitary because it can foster the growth of germs that can disrupt bowel health. If you don’t know how to clean gas stove pipes, then just scroll down this article. Here we will discuss how to clean stove pipe in three different methods and just a few easy steps.

How to Clean Gas Stove Pipe

How to Clean Gas Stove Pipe

You may have bought the best gas stove or the best auto ignition gas stove in the market, but if it is not maintained, their efficiency drops, which is why it is essential to clean your gas stove regularly. There are 3 methods that can be used to answer the question “How To Clean Gas Stove Pipe”. Method 1 will show us how to use vinegar and baking soda, method 2 will use only Vinegar and method 3 will lemon juice to clean the gas stove pipe.

Method 1

The first method uses vinegar and baking soda to clean the gas stove pipe. This duo is a powerful combination that can clean any surface with ease. The acid in the vinegar will aid in the removal of grease. Other than grease, the baking powder will help remove any other particles.

Ingredients needed:

  • White vinegar
  • Baking soda
  • Scrubber
  • Toothbrush
  • Water
  • Wide, flat-bottom pan

Step 1. First, prepare the solution in a flat-bottomed pan. Submerge the pipe entirely in a 50:50 mixture of water and vinegar.
Step 2. Allow the pipe to soak in the solution for 30 to 45 minutes.
Step 3. After that, remove the pipe from the mixture and wipe it clean with a cloth.
Step 4. Then, for the next step, make a thick paste of baking soda and water.
Step 5. Apply the paste to the pipe’s external coating. Apply to the entire length.
Step 6. Allow it to rest for 20 to 30 minutes.
Step 7. Scrub the outer portion gently with a scrubbing brush.
Step 8. Thoroughly rinse it under running water and dry it with a clean cloth

Method 2

The second method is done by using vinegar. Vinegar can be used as a deep cleaning cleansing agent and can eliminate all the greasy or dried-out surfaces. 

Ingredients needed

  • White vinegar
  • Scrubber
  • Water
  • Clean dry cloth
  • Deep bowl

Step 1. Pour an equal amount of vinegar and water into a large, deep bowl. Completely immerse the greasy gas pipe in the solution.
Step 2. Confirm that the pipe is completely immersed in the solution. If not, flip the pipe after 3 minutes and let it rest once more.
Step 3. Remove the gas pipe after 30 minutes and scrub it with a scrubber or a toothbrush.
Step 4. Now pat the pipe with a clean cloth or allow the pipe to air dry after rinsing it with water.
Step 5. If more cleaning is needed, repeat the steps.

Vinegar is strong enough to remove all those debris from the pipe alone. You don’t have to use anything with vinegar if you opt for this one. 

Method 3

The third method is using lemon juice. If vinegar is unavailable, lemon juice will suffice.


  • Lemon juice
  • Ziplock bag
  • Thin bottle cleaner
  •  Soft scrubber
  • Water

Step 1. First, fold the gas stove pipe into a coil shape and place it in a large ziplock bag. Fill the plastic bag pretty much with lemon juice and water.
Step 2. Maintain this state for 30 to 40 minutes.
Step 3. Take the pipe and give it a good shake. It will clean up all loose debris from the pipe’s inner wall.
Step 4. Remove the pipe from the ziplock bag and clean the inside with a thin bottle cleaner. Any soft scrubber can be used to clean the outside of the pipe.
Step 5. Wash it under running water once the dirt and debris have been completely removed. Allow the pipe to dry in the open air.

After you have cleaned the pipes of the gas stove, you can use the steps listed in our article, ‘How to Connect Gas Pipe to Stove in India‘ to reconnect the cleaned pipes to the gas stove.

How to Clean Gas Stove Burner Heads, Grates and Caps

To prepare the gas stove burner or cleaning, you have to make sure it is turned off and cooled down to use it safely. Next, remove the caps and burner grates properly and prepare a mixture of warm and soap to use as a cleaning agent. Then, soak the gas burner in the soap water and wait for a good few minutes for it to get completely dunk in it. On the other hand, you can dust off all the loose dirt from your stovetop easily.

1. Cleaning The Gas Stove Burner

Cleaning The Gas Burner And Stove

After soaking the gas burner, you may opt for a good-quality kitchen spray to clean the surface of your gas stove, which is often very useful. It’ll help to get rid of any stubborn grease and stain from the surface. You can also choose to use a toothbrush for cleaning as it is more convenient and easier to clean with since it also helps to reach the specific areas where your bare hands cannot. To wipe away the residue, you can use a clean cloth or a soft sponge.

Remember to scrub it all while using a cloth or a sponge, and use fresh and clean water to wash everything properly after you are done with it. However, don’t forget to dry everything off once you’re done before placing them back on your gas stove properly.

2. How To Clean Gas Stove Grates

 How To Clean The Grates

This method uses vinegar and baking soda, two natural cleaning agents, to help break down the grease and clean the gas stove like a new buy. To start off with, ensure that the grates are completely cooled off before you remove them from the stove. Fill a pan with half water and half vinegar, and place the grates in the pan to allow them to soak in entirely for at least 30 minutes. Next, remove the grates from the mixture and rinse thoroughly. Now, mix water and baking soda to create a paste and coat the grates with the paste to sit for 20 minutes. Use a toothbrush or a scrubber to remove the caked residue and rinse and clean everything before reassembling.

3. How to Clean Gas Stove Burner Holes?

The flame will be weaker or may not work with all of the grease splatters and debris on the burner. This means, the burner head and holes are stuffed with excessive build-ups, and it’s time for you to clean it. So if you are wondering how to clean gas stove burner holes, here are the easy ways to remove all the debris from it.

Step 1. First, confirm that the burner is completely cool before removing the burner head. 
Step 2. For about 20 to 30 minutes, immerse the burner heads and caps in a solution of liquid dish soap and warm water. This will ease the removal of tough debris.
Step 3. Then, using a soft scrubber and a toothbrush, gently scrub away the loosened debris. 
Step 4. To remove the junk from the holes, use a long needle or a straightened paper clip. Don’t rush through the procedure.
Step 5. After that, rinse the burner heads and caps under running water to wash away any remaining soap and debris. Using a soft cloth, wipe the surface dry.

Is Cleaning of Gas Burners Necessary?

It is necessary to keep your kitchen clean if you want to live healthily. Everything should be thoroughly cleaned, and gas burners are no exception. Burners can easily become clogged with food particles, grease, and other residues over time. It may even get rusted after using it for some time. Furthermore, if you continue to use the clogged burner, it will produce weak flames, lowering the effectiveness of your cooking.

A clean gas stove not only smells nice but also looks nice. Moreover, the clogged burner may release gas in the wrong way and can potentially pose a fire hazard. Keeping this in mind, it’s essential to keep your gas burners clean and debris-free.


Maintaining a clean gas stove is a good idea at all times. It not only keeps your kitchen clean, but it also makes sure that your expensive stove lasts for a long time. Whichever technique you choose, you can use a regular maintenance schedule that can be followed every month; this will keep the grease at bay and save you tiresome cleaning hours. Furthermore, a thorough cleaning will prevent accidents and increase the pipe’s durability.

Also, because most cleaning products contain chemicals, you should know whether or not they are harmful. And the cleaning agents suggested in this article are eco-friendly. This way, you can avoid using any potentially harmful products.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *